Welder Equipment Hire is part of the
Leengate Welding Group
SAFETY SYMBOLS
DATA SYMBOLS
DELIVERY SYMBOLS
Minimum recommended PPE requirements
Important equipment data
Approximate vehicle size required
GOGGLES
EQUIPMENT
WEIGHT
CAR
WELDING
MASK
SUPPLY
VOLTAGE
VAN
RESPIRATOR
AUXILLARY
POWER OUTPUT
LARGE
VAN
EAR
DEFENDERS
REMOTE
CONTROL AVAILABLE
TRUCK
HARD
HAT
FOOT
CONTROL AVAILABLE
SAFETY
FOOTWEAR
WATER
COOLED OPTION
PROTECTIVE
GLOVES
DC 655 POWER SOURCE
This 800-amp CV/CC power source produces 650 amp at a 100% duty cycle and is ideal for construction and shop fabrication because of its excellent arc performance and many energy saving features. This machine also has a high overall efficiency of 84% for even more energy and cost savings. Save money with the idle shut down timer that powers down the DC-655 when not in use for extra energy conservation. Don't think you're sacrificing arc performance for efficiency; the DC-655 features a calibrated output knob for precise procedure setting and adjustable arc force for a tailored arc and ultimate performance.
Dimensions (mm) H x W x D: 699 x 564 x 965
LT-7 TRACTOR
The LT-7 Tractor is designed for the submerged arc process and has track system capabilities. It is self-guiding and easy to operate, and can be used with a variety of DC power sources. The rugged, lightweight unit permits quick movement, and Its compact size fits through small openings and confined spaces. Butt and fillet welds can be made on heavy plate or light gauge steels. The LT7 is ideal for ships and barges, storage tanks, bridges, deck installation, beams, girders or column fabrication.
2.4 to 4.8 mm solid wires, from 2.5 - 10.2 metres per minute wire feed speed.
• Calibrated tractor drive speeds from0.12 to 1.8 metres per minute.
• Weld angle is up to 50° from vertical on either side; drag angle is up to 30° from vertical.
• Welds butts, horizontal fillet and lap joints to the left or right side of the tractor frame for convenience.
Dimensions (mm) H x W x D: 698 x 838 x 356
DC 1000 RECTIFIER
If your application requires pure welding power combined with multi-process power, the DC-1000, with 1300 amps of smooth DC output, is your best choice.
Designed for semiautomatic and automatic welding, the precise control of the DC-1000 provides superior MIG, flux-cored, submerged-arc welding, and excellent air carbon arc gouging.